Summer has officially arrived. And water use triples in Scottsbluff primarily due to lawn and landscape watering. Timing your watering can save you money and the city water supply.
1. Know how much water your landscape actually needs before you set your sprinkler. Automatic sprinkler systems can waste up to 50% more water than manual when timers are set and left instead of adjusted for current moisture and temperature.
2. Water in the early morning or after the sun goes down in the evening when its cooler and calmer. Its estimated that 50 percent of sprinkler water goes to waste from evaporation, wind, or runoff.
3. Install a smart controller that uses weather data to determine when and how much to water.
Photo © Publicdomainphotos
2. Check the time. Install a fresh set of batteries in the timer and check the programming schedule to water in the cooler, still times of day. Rain or moisture sensors can further reduce over or ineffective watering. According the EPA, ” a home with an automatic irrigation system that isn’t properly programmed or maintained can waste as much as 30,000 gallons of water annually.”
3. Connect well: Check for leaks where heads connect to hoses or pipes. Pooling areas indicate leaks that need immediate repair. A leak about as small as the tip of a ballpoint pen (or 1/32nd of an inch) can waste about 6,300 gallons of water per month.
4. And Remember – have the testable backflow prevention device on the lawn system checked once every five years by a certified plumber. It protects the municipal water supply that serves not only the lawn, but also quenches the thirst of our residents.