Waterwise Wednesday: Winter Water Tips

Photo © Valdore

Use the cold weather to try some indoor water management.

1. Check for leaks and fix right away. A 1/32 inch hole can leak 6,000 gallons of water per month.

2. Install faucet aerators and low-flow shower heads to use less water without compromising flow in the bath and sinks.

3. Place a jug of water or brick in the toilet tank to displace water and use less per flush or replace the toilet with a Water Sense high-efficiency model that uses 1.28 gallons per flush or less.

4. Wash full loads, many washing machines don’t adjust for load size and run 40 or more gallons of water per cycle. Make best use of the water by washing only full loads or remember to set your machine for a lesser load, if it can be adjusted.

5. Insulate your water heater and water pipes. Check the water heater tank for an R-value of at least 24. If its not, insulating your water tank could reduce standby heat loss by 25%–45%.

Water Wise Wednesday: Another Way to Tell Time

A drip a second from a leaky faucet sends five gallons of water down the drain in a day. An hour could be measured as 3,364 drips or about 3 3/4 cups of water.

According to the US Geological Survey, a typical drip is between 1/5 and 1/3 of one milliliter. Using 1/4 of a milliliter as an average, the USGS estimates that roughly 15,140 drips from a faucet equals one gallon of water.

In the end, it’s probably easier (and cheaper) to just set the clock ahead for Daylight Savings Time this Sunday.

Copyright: Dreamstime.com

Waterwise Wednesday: Leaky Toilet

The bathroom toilet accounts for 25%-30% of daily water use in the U.S. home. A leaky toilet can waste as much as 200 gallons of water a day.

Check for leaks by putting a few drops of food coloring in the tank, don’t flush. 
If the color reaches the bowl in 10-15 minutes there’s a leak. It’s likely the toilet flapper is worn and no longer seals.


Image may contain: text